What Size Does Scaffolding Come In?

What is the minimum size for scaffold planks?

All scaffold planks must be inspected and tested before use.

Lumber or manufactured scaffold planks used for a work platform must consist of at least two planks placed side by side to provide a work surface with a nominal width of 50 cm (20 in.), or nominal width of 30 cm (12 in.).

What is the minimum plank width for a ladder jack scaffold?

18 inches17.3. 2 The minimum width of the platform of a ladder jack scaffold shall be 18 inches when a wood plank is being used and 12 inches when a fabricated platform is being used.

What is the standard size of scaffolding?

Single Wide Scaffold is approximately 29 inches wide so it can roll through standard doorways. Perfect for work in congested or narrow areas. Available in 6, 8, or 10 ft lengths. When properly braced extension sets can be added to increase the height of Single Wide Scaffold.

How high can Scaffolding go?

Scaffold tower can be erected in all shapes and sizes. The standard dimensions are 5 foot and 7 foot long. Reaching 5 foot high all the way up to 30 feet tall.

What is the minimum height at which guardrails are required on scaffolding?

36 inchesQuestion (1): Under §1926.451(g)(4)(ii), the minimum height for scaffold guardrails manufactured and first placed in service before January 1, 2000, is 36 inches. The minimum guardrail height for scaffolds manufactured or first placed in service after January 1, 2000 is 38 inches.

What is bay length in scaffolding?

BAY LENGTH: The horizontal distance between any two longitudinally-adjacent standards in an independent scaffold or a single-pole scaffold, or the horizontal distance between any two longitudinally-adjacent support points on the cradle of a suspended scaffold.

What is the most commonly used type of scaffold?

Supported ScaffoldingSupported Scaffolding This is the most commonly used form of scaffolding and is the type that you will see being used in construction work and on most other forms of work where elevation is required.

What are the 2 basic types of scaffolds?

There are two basic types of scaffolds:Supported scaffolds, which consist of one or more platforms supported by rigid, load- bearing members, such as poles, legs, frames, outriggers, etc.Suspended scaffolds, which are one or more platforms suspended by ropes or other non-rigid, overhead support.More items…

Can you put up your own scaffolding?

You must use a builder or scaffolding contractor who is trained and competent if you want to put up scaffolding. It’s the responsibility of the builder or scaffolding company to get a licence for any scaffolding they put up on the highway (this includes the pavement).

What are the 3 types of scaffolds?

There are three basic types of scaffolds: Supported scaffolds, which consist of one or more platforms supported by rigid, load-bearing members, such as poles, legs, frames, outriggers, etc. Suspended scaffolds, which are one or more platforms suspended by ropes or other nonrigid, overhead support.

How is scaffolding measured?

Measure the total length of the area that will need scaffolding. Divide the total length measurement by the length of a single scaffolding section. This will determine the total number of columns of scaffolding the project will require.